Whether you are interested in crafting bullwhips as a pastime hobby or you plan to create bullwhips to sell, this is one craft that can prove to be much harder than it first appears. While many people assume that making a bullwhip is as simple as braiding strands of leather together, things can get pretty complicated if you’re inexperienced. To ensure the bullwhips you create with your DIY endeavors don’t end up looking like a tangled clump of leather strings, there are a few mistakes you should learn to avoid. Check out the most frequent mistakes DIYers tend to make when crafting a leather bullwhip for the first time.
Mistake: Using low-quality leather that is improperly cut.
Why? Braiding the bullwhip together with leather strings requires absolute precision with every loop and twist, and this can be extremely hard to achieve if the leather materials you are using are of low quality or are not cut perfectly straight. It is well worth the added expense to invest in good quality leather pieces when you will be using the leather to create a bullwhip because this will directly reflect in the end result that you achieve.
Mistake: Not closing braided loops tight enough.
Why? As you are braided the long leather strands together for your bullwhip, it is absolutely crucial that you don’t let go of the tension of the strands so you get tight loops every time. If the braid of the leather is not tight enough, you will end up with a loosely constructed bullwhip that has no snap to it when you crack it and will not hold up very well through the years. Simply make sure every loop you make and every crossover you perform while braiding is done so in a taut way to hold every strand perfectly in place.
Mistake: Not adequately binding the end of the bullwhip when the braiding is complete.
Why? For a bullwhip to look authentic, it needs the tip to be bound for a more finished appearance. Binding the tip of the whip can be accomplished in many ways, from wrapping the tip in rubber tape to binding it together with a thin piece of taut leather. Either way, you have to ensure that the binding you apply to the tip end of the whip is in place well. If it is not, one crack of the whip can send the binding off.
For more on this topic, check out a company like Quality Whips by Victor Tella.Learn More
Enclosing your yard with a privacy fence doesn’t mean that your scenery has to come to a dead stop. Instead of leaving the privacy fence plain, paint a mural on it. The mural you choose can be anything that you enjoy looking at – like a beach scene, colorful flowers or wild animals – whatever makes you feel good.
If you aren’t the most artistic person, you may chuckle a bit at the idea of painting a mural yourself, but it can be much easier than you think. With the help of a homemade projector, some plastic transparency sheets, a design you like, chalk, a marker and some paints, you can create something remarkable to surround your yard.
Make a Projector
If you don’t have access to a “real” projector, you can make one yourself using nothing more than some cardboard, a lamp without a shade and some duct tape.
Form the cardboard to be slightly smaller than the transparency sheets. You want to make a box with no ends that you can attach the transparency sheets on to one end and stick a lamp up the other.
When you are done, the cardboard will look like a square tube and the lamp will shine through and project the image that you draw onto the transparency paper on to the fence in front of it.
Create the Image
You can use any image that you like, but keeping it relatively simple will make for an easier project for you, especially if you are not the best artist in town. These images can be from your computer, magazines, kids’ coloring books or even pictures that you have taken. As long as the image is large enough for you to trace, it will work.
Lay the transparency paper over the picture and trace the outline and minimal details that you will need to paint the picture on the fence.
Get to Work
Now that you have everything you need, wait until you have two or three days of dry weather forecasted. Take your projector, the transparency sheet and some chalk outside just after dark. You will need the dark to see the image you are projecting on the wall clearly.
Shine the image onto the fence moving the projector forward to make it smaller and back to make it larger until it is perfect. Now, trace the image on the fence with some chalk.
The next morning, you can begin painting the mural as if you are coloring in your child’s favorite coloring book. After you have finished perfecting your mural, apply a coat of sealant (available from companies like Koontz Hardware) to protect it from the outdoor elements and enjoy your mural for years.Learn More
If you are interested in rare coins or have some that have been given to you, these can be a very valuable asset. Knowing how to care for them is also important, which you will want to keep them in a desirable condition. This means that you may want to have them in cases and understand how to care for them. You should also learn when or if you should even clean your coins. If you want to know more about caring for rare coins, here are some tips to help you get started:
1. What You Need To Know About Cleaning Old Coins
It is a good rule of thumb to never clean your old coins. This can damage the coin and cause it to lose its value. There may be some circumstances that require light cleaning, such as a coin being encrusted in dirt. To clean dirt off a coin, you can soak it in water and gently dab the dirt off. You will want to be careful not to scrub the coin, as this can cause scratches and damage the coin. Getting the dirt off the coin is enough to clean it without damaging the coin.
2. Dealing With Extreme Corrosion And Discoloration Of Coins
In some cases, just cleaning dirt off the coin may not be enough. Corrosion and unnatural discoloration of some metals can harm the coin. This can often be seen with copper coins that have been in contact with plastic and start to turn green. There are treatments that can be done to remove the corrosion without doing a lot of damage. This is something that should only be done to remove corrosion, and not to polish a rare coin.
3. Preserving Your Rare Coins In Their Original State
You will also want to preserve your rare coins in their original state. This can be done by putting them in an album that is designed for coins. Also, keep your coins in a dry place, where moisture and humidity cannot get to them. A glass cabinet is a good place to store coins, and it can make an interesting display for your collection.
4. Choosing The Right Coin Case For Your Most Valuable Coins
You may not want to have your most valuable coins stored in an album or with other coins where they can be damaged. Putting valuable coins in a good case can be a great way to keep them safe. A good coin case for your most valuable coins can have a glass face on it, and be made out of a moisture-resistant material. For coins with a very high value, you can also get lock boxes that are designed to keep your precious coins safe.
With the proper care, your rare coins will be more valuable, and you will have an asset that you can pass on. If you are interested in expanding your coin collection, contact a rare coin dealer to find what you collection is missing and get more advice on the proper care of your coins.Learn More
If you are looking for a new and interesting bracelet to accessorize your favorite outfit with, why not make your own? There are many bracelets that are very easy to do and only require simple supplies. One such bracelet is a skinny leather bracelet, which is made with thin leather cord and your choice of beads for the center. Here are instructions for making your very own skinny leather bracelet:
Cut Your Leather Cord
The first thing you need to do is cut the leather cord to size. Thin leather cord is sold in spools, so you can choose any length you want. A good way to determine the size is by releasing some cord from the spool and wrapping it loosely around your wrist. Make sure you cut a little bit of extra cord to make room for the clasp. A simple pair of wire cutters should cut the cord effectively.
Add the Beads
Now it is time to add your beads. You can use any beads you want for your bracelet, though you should pay attention to the hole in the bead. You want the hole to be large enough to fit over the cord, but not so large that the beads are constantly sliding back and forth on the bracelet.
A good bead to use is a metal tube bead. These are long, curved beads that fit perfectly in the center of a skinny leather bracelet.
Slide your chosen bead onto the leather cord, stopping just short of the center. Add a small amount of glue to the center of the cord, then carefully slide the bead all the way so it adheres to the glue. Choose a glue that is meant for jewelry, since this type of glue will work on different materials, including leather, ceramic, glass, and metal.
Finish the Bracelet
Once the glue underneath the bead has dried, which should only take a few minutes, you can finish the bracelet. Start by adding a small amount of glue inside a metal end cap, then press one end of the cord inside the end cap. You will need to hold the cord inside the cap until the glue dries. Repeat the process with the other side.
Once the glue dries on both sides, open up a jump ring using a pair of pliers. Slide the jump ring on one of the end caps, then close it with the pliers. On the other side, repeat the process with the jump ring, but before you close it, add your chosen bracelet clasp. You can now close the jump ring and wear your bracelet.
To learn more, contact a company like Birdstone Bead Studio with any questions you have.Learn More
Chinese knotting cord, otherwise known as nylon braided cord, is a thin, pliable material frequently used in necklaces, braces, and earrings. But despite what you might be thinking, Chinese knotting cord can also be used to make all sorts of practical tools. If you’re not sure what to make with any Chinese knotting cord you happen to have lying around, seriously consider making one of these three unconventional but surprisingly useful tools.
Key Chain Lanyard
While there’s a wide variety of lanyards for key chains out there that you can purchase, it’s not easy to find one at an acceptable price. If you make your own lanyard with Chinese knotting cord, you’ll both save a significant amount of money and have the ability to completely customize your key chain’s appearance.
While lanyards are relatively easy to make even for someone who’s inexperienced, there are still a few pitfalls that you need to avoid. For example, it’s important that you tie separate cords together at least two or three consecutive times to form the body of your lanyard. Two cords alone tied together will create a very flimsy body at risk of falling apart.
Since Chinese knotting cord is still pretty thick relative to paper, it doesn’t make much sense to use it for a bookmark body. But while laminated paper is definitely an excellent choice for the part of the bookmark actually separating book pages, a tassel made of Chinese knotting is practically essential in order to make the bookmark easy to find and remove.
The most common mistake people make when designing a bookmark tassel made out of Chinese knotting cord is wrapping too many individual cords together. This makes for a very thick tassel that will be unwieldy to use.
While Chinese knotting cord isn’t sturdy enough to support a very large basket, smaller baskets used for things like storing craft supplies benefit much more from it. As long as the part of the basket that will connect to the handle is very strong, Chinese knotting cord is more than adequate to the task. In fact, its rough but pleasant texture relative to straw and plastic handles makes it the best handle material for a wide variety of situations.
When thinking about what you’re going to do with your spare Chinese knotting cord, it pays to think outside the box. Remember that just because a material is typically used for purely decorative objects doesn’t mean that it has no practical value.Learn More
Learning to play the guitar is best done under the eye of a skilled teacher. Children can begin learning guitar around the age of six or seven, or once they have the fine motor control to play the instrument. Preparing the child for their first lesson ensures they get off on the right foot in their new hobby.
#1: Get A Guitar
When it comes to guitars, there are many styles and choices. For the first guitar, though, you can narrow it down to the two main options:
The acoustic guitar is a good option for the beginner, because you can find quality acoustic guitars inexpensively and there is less equipment to purchase and master. It’s versatile enough that your child can use it to learn any genre of music. If you’re not quite ready to invest in a guitar for your child, many teaching studios have rental guitars available for their students.
When purchasing a guitar for a young child, make sure it is sized appropriately so they can easily hold it wrap their fingers around the fretboard.
#2: Assemble a Kit
Your child will need to bring more than just the guitar to the lesson. Pack a lesson bag with these items:
The teacher may request additional materials, such as a pocket recording device or a metronome, so ask for specifics before the lesson. If your child has an electric guitar, you usually don’t need to bring the amp, but you will need to make sure the cord is packed in the case or bag.
#3: Schedule a Lesson
When scheduling the lesson, there may be two choices – group or individual lessons. An individual lesson is much preferred for the first few sessions, when your child is learning the basics of using the instrument.
You can sometimes switch to less expensive group lessons once your child knows the basics, but they are better-suited for teens. Young children often need the one-on-one attention of an individual lesson.
#4: Set Expectations
Disappointment, especially in teens, can be managed by setting realistic expectations. For example, there may be very little guitar playing in the first lesson. The teacher will usually help familiarize the child with the position of the notes on the fretboard, proper fingering, and reading the music. Scales and simple melodies are the first things taught, not a favorite song. If your child knows this, they are less likely to become frustrated at the initial slow pace of the lesson.
Work with the guitar teacher so you can make sure your child is fully prepared for their guitar lessons. Fostering a good relationship with the teacher now will ensure that you are able to fully support your child’s new musical hobby at home.Learn More
Radio controlled vehicles are an extremely popular hobby, but it can be a difficult hobby to break into because it can be highly technical. Sadly, this can be discouraging to those that are interested in pursuing this pastime. Not surprisingly, there may be a couple of questions that you need addressed if you are looking at getting into this rewarding hobby.
Are All Radio Controlled Cars The Same?
Some people may make the mistake of assuming that all of these vehicles are essentially the same, but this is actually far from the truth. For example, it is possible to get a RC car that is either gas powered or electric. Each one of these models has its own set of unique benefits, and there are a couple of important factors to consider when you are making this choice.
Gas powered motors are generally better suited for advanced or experienced operators. This type of RC car requires much more intensive maintenance. However, these engines can be heavily modified, and this makes it ideal for those that are wanting to engage in high end racing or customizations.
Electric powered RC cars are usually recommended for novice operators because they have simpler controls and require less maintenance. While this style of car can not be modified as extensively as gas powered engines, this should not be a major concern for those just entering the world of radio controlled vehicles.
What Is Included With A Radio Controlled Car Kit?
Some people may like the idea of building a radio controlled car, and while you may think that this would only be in the realm of experienced operators, this is not always true. It is possible to purchase RC car assembly kits that can be suited for almost any experience level.
Typically, these kits will include the motor, body, wheels, decals, radio control and the internal electronic components. What determines the difficulty is largely the complexity of assembling the pieces. Fortunately, if you do not have much experience with this hobby, it is possible to buy a beginner kit that only has a few pieces that need to be assembled, and this can be an excellent way of introducing yourself to RC vehicle building and operation.
Radio controlled cars are a popular and affordable hobby that millions of people enjoy. After learning the answers to these common questions, you will be better prepared for what to expect when you undertake this new hobby and find servos for sale online.Learn More